Model: Display dual-band GSM900/3G2100 2G/3G cell phone booster Frequency: GSM900: Uplink 980-915MHz Downlink 935-960MHz 3G/WCDMA: Uplink 1920-1990MHz Downlink: 2110-2180MHz Power: ≥ 27dBm Gain: 60±3DB Maximum Output Power: +23dBm/±3DBM Total Power Impedance: 50Ω Confidentiality: <70dB Connector Type Connector Type: N-F Compact design: Indoor use Operating temperature: -10℃-60 Power supply: AC 110/220V DC12V/2A Coverage Area 1000m2 Overall dimensions: 29cm x 18.5cm x 5cm Package size: 34cm×27cm×18cm Package weight: 3.0kg Package Gold Card 900/3G 1pc Outdoor antenna 1pc Indoor antenna 1pc Cable 10 meters 1pc Cable 5 meters 1pc Adapter 1pc Installation 1. Find the direction and position of the strongest cell phone signal reception on the top or periphery of the building as the installation position of the outdoor antenna, and note that the position should be protected against lightning. The installation height should not be higher than the lightning protection net of the building. If higher than the lightning protection network. Then install a lightning rod 1 meter above the outdoor antenna and ground it properly. 2. After selecting a suitable location, fix the outdoor antenna on the wall or bracket. 3. Select a suitable location in the relevant indoor location (close to the power supply and outdoor antenna end, rain-proof, sun-proof and ventilated is the best location) to install the indoor repeater and fix it on the wall or bracket. 4. Lead the outdoor antenna to the "Base Station" (outdoor) interface to complete the connection between the outdoor antenna and the amplifier. 5. Fix the antenna after determining the indoor antenna installation position. 6. Connect the indoor antenna to the amplifier with one port to the indoor antenna connector and the other port to the "MOBILE" (indoor) port of the repeater.
