Panel & function
1.Equipment is for handheld , Top left is for the antenna .
2.right is the sensitivity adjustment knob. Clockwise to strengthen,Counterclockwise to reducesensitivity.
3.The middle is 10 level led,window is GPS sensing area.
4.From the under the first on is charge indicator,will light when charging,the light will out when full of charge.
5.The lower circle button is the sleep detection power switch.
6.The second place is thewireless knod power supply instructions.
7.The third to tenth is for Detection instructions , a signal from weak to strong.
8.if all lights flash , will produce “ beep ” sound , the sound is mor urgent , the signal is more strong.
Instructions
1.Hibernation GPS detection:Turn on the hibernation detection power switch.The sleep power-on indicator lights up and enters the
working state.If GPS is detected,it will sound an alarm.
2.Turn on wireless probe knob power switch , second led lights , means power to work normally .
3.Turn the knob clockwise to the largest , enter standby mode . If receiving stronger environmental signal , then adjust the
rotary knob back , the light falsh not more than the fifth light .
4.Signal is full , soundbeep.The signal is more strong,the sound will be more rapid .
5.when light bars are full and bright , the sound is more rapid , means it is near to the target . If we adjust the rotary knob
back when the signal is strong , so it is easy to find the target object .
6.Due to high sensitivity, so we can receive the siganl from Mobile phone base stations, television broadcasting station on the
road . If you want to find car GPS , pls drive it to the place with weak signal , also pls set the equipment of communication as
airplane mode , then the detector can work .
7.If there is no target in the room , but the detector will alarm at times, the possible will be:
1) Your own communication equipment will match code with base stationin timing and automatic.
2) the target is near to the room , maybe in another room , or somebody called in another room .
3) Too close with the wireless router.
Main feature
1.Professional radio detection device , high sensitivity , adjustable threshod , large range of frequency detection
2.Easy to use (only switch +sensitivity knob ), Sound and light alarm indicator, accurate and reliable.
3.can detect Mobile, unicom, telecom , 2G,3G, 4G card for bugs and locator
4.can detector High -speed upload GPS locator packet locator
5.can detector 1.2 G/2.4G wireless camera
6.can detector hidden 5.8 GHz wireless camera and wireless eavesdropping.
Technique Data
Frequency Range: 1 MHZ -8000MHz
Detecting the dynamic range: >73Db
Detection sensitivity: ≤0.03mw ( main frequency )
Detect Range:
2.4 GHz wireless camera: 10 Square meters(standard 10 mw camera )
1.2 GHz wireless camera: 15 Square meters(standard 10 mw camera )
Mobile : 2G,3 G, 4 G: 10 Square meters
Indicating:9 level LED luminous Instructions / modulations sound instructions
Power: built -in 3.7V lithium polymer
battery:
Working Current: 60mA;Working time: 10-15 hours;
Material:ABS plastic
Weight:120g
Volume:115x52x20mm
