Multi-functional wireless signal analyzer and processor

Multi-functional wireless signal analyzer and processor

Products

Modern society, technology iteration is getting faster and faster, especially electronic technology is rapidly changing, micro-camera and GPS smaller and smaller, the naked eye and ordinary equipment is more and more difficult to detect. Unlawful elements in the profit motive, and even integrated into the gray chain of peeping and eavesdropping, crazy violation of personal privacy and important business secrets, can not be prevented, so that the victims are often accompanied by material and spiritual losses and trauma. DJ01 is for the above threats, the development of a grass-roots level of wireless signals based on the principle of full-coverage, can be effective in preventing and disposing of the privacy leakage of the professional instruments. It can not only detect the signal strength of broadband radio waves, but also the 2.4Ghz band Wife signal MAC address resolution, automatic identification of the MAC address corresponding to the manufacturer's information, to identify the detected MAC address whether the video transmission protocol for the camera, intelligent identification of suspected photographic camera equipment. For the detected Wifi devices, you can also make accurate analysis of its channel, frequency, signal strength, so as to quickly find the hidden micro camera equipment. The device is multi-functional and can also provide multi-channel and multi-method GPS search through the magnetic field detection function. Its integrated blocking function, but also in a certain range of illegal devices are zero, open, based on the Wife transmission of video and audio camera clandestine photography equipment, was secretly placed on the GPS positioning equipment can be directly effective blocking isolation, for the user to build a safe and effective privacy protection barrier.

Function

Ø Broadband detection: 10Mhz-6Ghz broadband radio wave detection and analysis

Ø Magnetic field detection: automatic search for GPS locators with strong magnets

Ø WIFI detection: 2.4G/5G band WIFI signal MAC address, attributed manufacturers and brands

Ø WIFI blocking: block WIFE signals, isolate sneak peeking devices within effective range

Ø GPS blocking: block GPS satellite signals and isolate positioning devices within the effective range.

Ø Setting: Setting and adjusting the machine's alarm mode, sensitivity, detection range, display language, and so on.

Operating Methods

Turn on/off the machine. According to the machine labeling, left and right toggle the switch to turn on and off the machine.

II .   After powering on the machine, that is, enter the machine function display state, use the switching key to adjust to their own needs of the function, press “OK” to confirm the key, into the corresponding function. Below we press the machine screen from left to right, from top to bottom of the order of one by one introduction.

III .  Broadband detection function.

1、 This function is mainly used for detecting and analyzing 10Mhz-6Ghz broadband radio wave signals, its detection range can reach -65dBm to +25dBm, not only can the signal strength labeling, but also can be 60 seconds long water recording of the signal. At the same time, the characteristics of the signal detection and analysis, and ultimately in the form of different sounds on the characteristics of different signals to display. When the machine detects different types of wiretaps, locators, WIFE cameras and other signals, after the machine analyzes the audio signals presented are not the same, experienced users based on the different sounds presented by the machine to know the target signal source is which device. Let the original invisible and intangible electromagnetic waves become audible and visible.

2、After entering this function, use the “Switch” key to switch the four functions of “Sensitivity”, “Resolution Mode”, “Alarm Mode” and “Vibration” displayed on the bottom line of the screen. The four functions of “Sensitivity”, “Resolution Mode”, “Alarm Mode” and “Vibration” can be switched by using the “Switch” key.

3、“Sensitivity ‘can be adjusted by ’OK” switching key for high, medium and low.

4、“Resolution Mode” can be switched on and off by “OK” switching key, and the corresponding function displays red font when it is turned on. This function is the main function, realize the electromagnetic wave through the analysis of the sound to present the function.

5、"Alarm ‘Mode ’is switched on and off by ‘OK’ switching key, and the corresponding function displays red font when it is turned on. This function sounds an alarm when radio waves are detected.

IV. Magnetic field detection function.

This function is mainly used for detecting GPS that may have been secretly placed, most of the small micro-GPS on the market have strong magnetic properties, so you can easily and efficiently detect them accordingly.。

1、After entering this function, you can use the “Switch” key to switch the three functions of “Sensitivity”, “Sound” and “Vibration” displayed on the bottom line of the screen. The “Sensitivity”, “Sound” and “Vibration” functions can be switched by using the “Toggle” key.

2、“Sensitivity”, through the “OK” switching key can be high, medium, low three adjustments.

3、“Sound ‘is switched on and off by the ’OK” switching key, and the corresponding function shows red font when it is turned on.

4、“Vibration ‘mode can be turned on and off by ’OK” toggle key, and the corresponding function shows red font when it is turned on.

V. WIFI detection function.

This function is used to analyze the working condition of 2.4G band WIFI devices in the environment, and the analysis method is passive reception, which will not cause interference to the normal working electronic devices in the surrounding. Users can analyze the results of surrounding WIFI devices through the machine, according to the analyzed type and MAC address to determine whether there is a suspected camera device in the environment. Users can further judge the distance to the target suspects by the displayed signal strength, so as to quickly find out the target suspects.

1、After entering this function, use the “switch” key to adjust the search range, including 3 meters, 5 meters, 10 meters, 20 meters.

2, the top of the screen will show the search range, total number, the number of suspected.

3、If there are suspected substances, the screen will also be marked in red, use the “down” key to locate the red column, and then use the “OK” confirmation key, you can open the details of the red items, you can clearly see the “manufacturer's information “MAC address” ‘channel’ ‘frequency’ ‘signal strength’ and so on. and other details. The bottom of the screen also records the signal strength in 60S.

VI. WIFE blocking function

When you enter this function, you can block the WIFE signal within the range of about 5 square meters, and the camera equipment working based on the above signal band can no longer transmit the signal.

If you want to exit this function, press “OK” to confirm.

VII. Setting Functions

After entering this function, you can adjust “Sound”, “Vibration”, “Wideband detection sensitivity”, “Magnetic field detection sensitivity”, “WIFI detection range” and “Language”. “WIFI detection range” ‘Language’ can be adjusted.

Use “Up” or “Down” key to scroll and “Toggle” key to adjust.